Skip to Content
  1. All products
  2. Owasys
  3. owa450A+
  4. Owasys
Pricelist: Default EUR pricelist Pricelist
Pricelist: Default EUR pricelist Pricelist

owa450A+

The most capable variant in the owa450 family. The owa450A+ packs the full interface set into a compact IP40 enclosure — 4x CAN bus (including CAN-FD), 2x K-Line, 3x RS232, RS485, USB and an optional audio codec with speaker and microphone support.

With 10 standard digital I/O plus 3 additional inputs via the expansion connector, the owa450A+ gives you more I/O headroom than any other owa450 variant. Combined with global LTE Cat 1 connectivity, multi-constellation GNSS, a programmable accelerometer and optional 9-axis MEMS with dead reckoning, it handles everything from advanced vehicle telematics to voice-enabled industrial applications.

Powered by an ARM Cortex A8 processor running full Debian Linux. Wide 9–48V DC input range and operating temperature from -40 to +73°C. Optional WiFi 802.11ac, Bluetooth 4.2 and TPM 2.0.

  • Expanded storage
  • Wifi & BT
  • Audio Codec
  • Custom ethernet
  • Additional KLINE
  • MEMS
  • Additional RS485
  • TPM
Price
594.00 € 594.00 €
594.00 €
(Tax excluded)
Terms and Conditions
Key FeaturesTechnical SpecsDocumentation

Key Features

IP40Protection against ingress of solid objects ≥ 1.0 mm
LTE Cat 1With 3G/2G fallback — worldwide
ARM Cortex A832-bit processor at 800 MHz
512 MB DDR3+ 1 GB NAND flash + microSD (up to 1 GB / 2 GB)
Debian LinuxFull distribution file system
ProgrammableC, Python and more — highly customizable
Multi-GNSSGPS, GLONASS, Galileo, BeiDou — optional dead reckoning
4x CAN bus2x CAN 2.0B + 2x CAN-FD (8 Mbps, from rev R1B) — all standard
Full serial & bus2x K-Line · 3x RS232 · RS485 (optional 2nd) · USB 2.0 · Ethernet
10+3 digital I/O10 standard + 3 expansion inputs · 4 analog inputs · 24+14 pin connectors
Audio codecOptional — external microphone and speaker support
9-axis MEMSOptional — accelerometer + gyroscope + magnetometer
WiFi 802.11acOptional — a/b/g/n/ac
Power efficient9–48V DC · low-power modes · optional Li-Ion backup
Compact enclosurePC+ABS · 254 g · 150 x 94 x 32 mm · FAKRA connectors
iButton / 1-WireDriver identification and access control via Maxim 1-Wire

 

Technical Specs

ProcessorARM Cortex A8, 32-bit, 800 MHz
RAM512 MB DDR3 (option up to 1 GB)
Flash1 GB NAND SLC (option up to 2 GB)
Expandable storagemicroSD card holder
OSDebian distribution file system


LTE Cat 1 bandsB1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B26/B28/B66
UMTS/HSPA+B1/B2/B3/B4/B5/B6/B8/B19
GSMQuad band (GPRS/EDGE)
LTE speedDL 10.2 Mbps / UL 5.2 Mbps
GPRSClass B, Class 12 (4&4)
VoiceNo standard voice — SIP client required


WiFi802.11 a/b/g/n/ac (optional)
BluetoothBluetooth 4.2 (optional)


ConstellationsGPS, GLONASS, Galileo, BeiDou, QZSS (concurrent)
Channels72 continuous tracking
SBASWAAS, EGNOS, MSAS, GAGAN
Update rateUp to 10 Hz
Accuracy2 m CEP
Cold start26 seconds
Hot start< 1.5 seconds
Signal reacquisition< 1 second
Dead reckoningOptional
Antenna power+3.3V active


CAN bus4x — 2x CAN 2.0B (1 Mbps) + 2x CAN-FD (8 Mbps, from rev R1B) — all standard
K-Line1x standard + optional 2nd K-Line
SensorsProgrammable accelerometer (standard) · optional 9-axis MEMS (ACC + gyro + magnetometer)
TPMTPM 2.0 (optional)
Digital I/O10 configurable — 50V max inputs · 8 OC outputs (200 mA) · 2 high-side switches (1A) · short-circuit protected
Expansion inputs3 additional digital inputs via 14-pin expansion connector
Wake signalsAll inputs function as wake signals for low-power modes
Counter inputsAll inputs usable as 32-bit counters (odometer), 3 kHz max
Analog inputs4x · 12-bit resolution · 1% accuracy · 0–5.12V or 0–30.72V (SW configurable) · multiplexed with DI/O
RS2323x (configurable: 3x TX/RX, or 1x TX/RX + 1x TX/RX/CTS/RTS)
RS4851x standard · optional 2nd RS485
USBUSB Host 2.0
Ethernet10/100 Base-TX (RJ45, optional M12)
1-Wire / iButtonMaxim 1-Wire — driver identification and access control
AudioAudio codec — external microphone + speaker (optional)
AntennasFAKRA connectors
System connectors24-pin main + 14-pin expansion
Power output5V / 500 mA
Status LEDs4x


Input voltage9–48V DC
Consumption — Standby9.88 mA
Consumption — Run47 mA
Consumption — Run + GSM + GPS73 mA
RTC backup batteryStandard — 10 year duration
Li-Ion backup batteryOptional rechargeable 3.7V (2,000 mAh) — inserted via rear battery cover


Without battery-40°C to +73°C
With battery (external power)-40°C to +55°C
With battery (battery powered)-20°C to +55°C
Battery charging0°C to +45°C
Industrial grade components-40°C to +85°C


IP ratingIP40
MaterialPC+ABS
System connectorsMolex Microfit 24-way (main) + 14-way (expansion)
SIMmicroSIM (3FF) · optional MFF2 embedded
Antenna connectorsFAKRA
EthernetRJ45 (optional M12)
Expandable storagemicroSD
Dimensions150 x 94 x 32 mm
Weight254 g


 

The owa450A+ is the top-tier variant of the owa450 family with 4x CAN bus (CAN-FD from revision R1B), 14-pin expansion connector and optional audio codec. Pin conflicts: CAN 2 removes DIO-2 and DIO-4. CAN 4 incompatible with 9-axis MEMS. K-Line and RS485 cannot operate simultaneously (SW selected). 2nd K-Line shares pin with DIO-5 and removes UART1. 2nd RS485 removes UART5. Analog inputs multiplexed with digital I/O. iButton multiplexed with DIO6. Contact your VYNZE account manager for exact configuration.


Documentation

BOK-100-9101-J_owa450-Datasheet.pdf

BOK-100-9108-H_owa450-Product-Variants.pdf

Build the perfect configuration

Everything you need to complete your setup!

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide enough options to retrieve its content.