SEALCEU868

Name: SEALCEU868
Price: 261.96 EUR
Availability: InStock

The TEKTELIC SEAL with Clip (SEALCEU868) is the harness-clip variant of the SEAL wearable GPS tracker, designed for personnel safety in industrial environments where attachment integrity is critical. The harness clip detects whether the unit is properly clipped in place and triggers a local audio-visual alarm if the device is disconnected — ensuring workers cannot accidentally leave the tracker behind or have it dislodged. All SEAL safety features are included: fall detection via 3-axis MEMS accelerometer, elevation detection via barometric pressure, integrated panic/SOS button, audio and visual alarms, geofencing, and multi-constellation GNSS (GPS, GLONASS, Galileo, BeiDou) plus Bluetooth Low Energy for indoor positioning. IP67 rugged enclosure. Powered by 3× AA Energizer Ultimate Lithium batteries. LoRaWAN Class A radio at up to 23 dBm Tx with −137 dBm sensitivity.

Terms and Conditions

Key features

Harness clip detectionAlarm if device disconnected · attachment integrity

Personnel safetyFall detection · elevation detection · panic button

GNSS + BLEGPS, GLONASS, Galileo, BeiDou outdoor · BLE for indoor

Audio & visual alarmsBuzzer + LEDs · local emergency indication

LoRaWAN EU868Class A · 23 dBm Tx · −137 dBm sensitivity

8–15 months battery3× AA Energizer Ultimate Lithium · user-replaceable

Technical Specs

Safety features

Harness clip detection	Triggers local alarm if device is disconnected
Panic / SOS button	Push button on enclosure · triggers emergency uplink
Fall detection	Via 3-axis MEMS accelerometer
Elevation detection	Via barometric pressure sensor
Audio alarm	Integrated buzzer for local indication
Visual alarm	Two sets of LEDs (top and front)
Mute button	Manual silence of audio alarm
Geofencing	Configurable boundaries with alerts

Tracking & sensors

GNSS constellations	GPS, GLONASS, Galileo, BeiDou
Indoor positioning	BLE-assisted via beacons
Accelerometer	3-axis MEMS · fall and impact detection
Barometric pressure	Elevation detection
Battery indicator	Remaining battery level reporting

Wireless & power

LoRaWAN radio	EU868 (863–870 MHz) · Class A
RF transmit power	Up to 23 dBm
RF sensitivity	−137 dBm (SF12, 125 kHz)
BLE	Bluetooth Low Energy for indoor tracking
Antenna	Internal
Battery	3× AA Energizer Ultimate Lithium (L91) · user-replaceable
Battery life	8–15 months (configuration dependent)
Other regions available	US915, AU915, AS923, IN865, KR920

Mechanical & environmental

Operating temperature	−20 °C to +50 °C
Ingress protection	IP67
Variant	Clip · designed for harness or belt attachment with detection
Compliance	CE · LoRaWAN certified

Other regions: This product page covers the EU868 variant. Versions for other regional channel plans are available on request.

When to choose the clip variant: Use this variant for hazardous aerial work, harness-required environments (e.g., working at height), or any scenario where the tracker must remain attached to a specific worker or harness.

Use cases: Working at height · scaffolding workers · roofing · tower climbing · construction safety · industrial work requiring harnesses.

Battery: Use only Energizer L91 Ultimate Lithium AA size 1.5 V lithium iron disulfide batteries.

Non-clip variant: For lanyard or belt wear without clip detection, see SEALBEU868.

Documentation

SEAL Wearable GPS Tracker Product Page (Tektelic)

SEAL User Guide (PDF)

Alternative Products

These other products might interest you

Build the perfect configuration

Everything you need to complete your setup!

See all