MICO1GEU868

Name: MICO1GEU868
Price: 1644.0 EUR
Availability: InStock

The TEKTELIC KONA Macro (MICO1GEU868-J) is a hardened outdoor LoRaWAN gateway designed for wide-area network deployments where harsh environmental conditions and long-distance coverage are required. This Ethernet-only EU868 TDD variant supports the full range of LoRaWAN channels and connects to an external N-Type LoRa antenna (sold separately) for flexible installation across dense urban or rural environments. Built around a robust UL Type 6 / IP67 enclosure with primary lightning surge protection on all interfaces (DC, Ethernet and RF), it operates reliably from −40 to +60 °C including solar loading. Powered via PoE 802.3at Type 2 Class 4 or direct 48 VDC input, with 20 W maximum consumption. Internal GPS provides precise time synchronization and geolocation. Mounting bracket and hardware are supplied for pole or wall installation.

Note: Other regional channel plans (US915, AU915, AS923, IN865, BR915, SN923) are available on request — please contact us for a quote.

Note: A LoRa antenna with N-Type male connector is required for operation and is sold separately.

Note: Professional installation by trained RF technicians is required. The gateway must be properly earth-grounded before any other interface is connected.

Terms and Conditions

Key features

LoRaWAN EU868 TDDTime-division duplex · external N-Type LoRa antenna

Hardened outdoor IP67UL Type 6 enclosure · pole or wall mount · −40 to +60 °C

Lightning protectionPrimary surge suppression on all interfaces · DC, Ethernet, RF

Built-in GPSInternal GPS antenna · time sync & geolocation support

Flexible powerPoE 802.3at Class 4 or direct 48 VDC · 20 W max consumption

Carrier-grade reliabilityCSA/UL/CE 62368-1 · FCC Pt. 15 · RSS-247 · EN 301 489-1

Technical Specs

LoRa radio

Channel plan	EU868 (other plans available on request)
Mode	Time-division duplex (TDD)
Antenna	External LoRa antenna required (sold separately)
Antenna connector	N-Type female · 50 Ω
Maximum antenna gain	8 dBi (omnidirectional)

Backhaul & interfaces

Ethernet backhaul	RJ-45 (threaded circular weatherproof connector)
Cellular backhaul	Not equipped (LTE variant available on request)
GPS	Internal antenna · time synchronization & geolocation
LoRa antenna port	N-Type female (water-tight when mated)
Direct DC power	2-pin CPC threaded circular connector
Earth ground	Two-hole lug · ¼ × 0.75″ spacing

Power supply

PoE input	IEEE 802.3at Type 2 Class 4 · Mode A/B/4-pair
Direct DC input	48 VDC nominal (37–57 VDC operating range)
DC source	SELV-compliant · positive or negative ground reference
Overcurrent protection	5 A recommended (2 A min · 10 A max external)
Power consumption	20 W maximum

Software & management

Management	Access control · radio configuration · remote upgrades
Image management	Active & passive image management · in-service updates
Remote access	SSH (port 22) · SNMPv3 (161) · HTTPS (443) · mDNS (5353) · ICMP
Networking	DHCPv4 client · TFTP server · HTTP server · firewall · ACLs
Onboarding	TEKTELIC LeapX application · plug-and-play deployment

Mechanical & environmental

Dimensions	144 × 92 × 283 mm (W × D × H)
Weight	2.68 kg
Operating temperature	−40 °C to +60 °C (including solar loading at sea level)
Relative humidity	10–100%
Operating altitude	−60 m to 4 000 m
Weather tightness	UL Type 6 (IP67)
Mounting	Pole or wall (bracket and M6 bolts supplied · M8 site-supplied for wall)
Surge protection	Primary lightning suppression on all interfaces

Other channel plans: This product page covers the EU868 variant. Versions for US915, AU915, AS923 (variants 1–4), JP923, IN865, BR915 and SN923 channel plans are available on request — please contact us for a quote.

External LoRa antenna: A LoRa antenna with N-Type male connector is required for operation and is sold separately. Maximum antenna gain is 8 dBi for omnidirectional types.

Installation requirements: Professional installation by trained RF technicians is required. The gateway must be properly earth-grounded (¼″ two-hole lug) before any other interface is connected. Mounting structure must support a dead load of at least 136 kg.

Documentation

KONA Macro Gateway Product Page (Tektelic)

KONA Macro Gateway User Guide (PDF)

Alternative Products

These other products might interest you

Build the perfect configuration

Everything you need to complete your setup!

See all